DEZOBUILD HRA
Liquid concrete super-lubricant based on polycarboxylate (water reducer and concrete slump preserver, with 50% solids)
Description:
The product description of the new generation water reducer DEZOBUILD HRA, based on polycarboxylic acid, is environmentally friendly and independently manufactured by our company. It possesses both water-reducing and slump-retaining properties, with a high water reduction rate and good slump retention. This product is a transparent, colorless, or light yellow liquid. It has low energy consumption, is formaldehyde-free, and is a low-consumption, environmentally friendly product.
Application, properties, and capabilities:
- Compatible with various types of existing cements
- A strong reducer of water consumption, capable of reducing water consumption by up to 40%
- Maintains suitable slump; this product can maintain slump for up to 1.5 hours without the need for additional additives like concrete retarders.
-"The water reducer of the new generation, based on polycarboxylic acid, is environmentally friendly and produced independently by our company. It has both water-reducing and slump-retaining properties, with a high water reduction rate and good slump retention. It is a transparent or light yellow liquid with low energy consumption, no formaldehyde, and low consumption, making it environmentally friendly.
-It is compatible with various types of cement, a strong water reducer that can reduce water consumption by up to 40%. It maintains suitable slump, allowing for up to 1.5 hours of slump maintenance without the need for additional additives such as concrete retarders.
-It has a significant effect on reducing viscosity, strong fluidity, especially for concrete with high powder content. It significantly improves strength and stability, initial and high strength, and stability in all ages, with very low chloride content, color, and very low alkalinity, much lower than the standard. Its alkalinity content is also low.
-It can be used simultaneously with other concrete additives such as pumping improvers, quick-setting and retarding agents, and anti-freeze agents for concrete. It has complete compatibility with the environment and does not produce any environmental pollution during the production process."
Consumption:
The recommended initial consumption dose is 0.8 to 0.2 percent by weight of cementitious materials. The actual consumption rate is determined based on laboratory and experimental tests. For consultation in this regard, you can contact the experts at the Technical and Specialized Concrete Clinic in Iran."
Attention:
The consumption dosage is based on the weight of cementitious materials used in concrete. Adjust the water consumption or sand content based on the needs of the concrete user. Add the product first to the mix and then to the other concrete components. Please note the following when using the product: When using the product for the first time or when there are changes in cement and other additives, it is necessary to control and optimize the necessary changes through laboratory tests. With a solid content of 50%, the product is denser than water. After long-term storage, the lower part may become denser and the upper part less dense. Please mix well before reuse. The color may darken over time, but it will not affect the product's use. This product is non-toxic, but ingestion is prohibited. Keep out of reach of children. If it comes into contact with the eyes or mouth, please rinse with water and seek medical help immediately.
Packaging and Maintenance:
The product is available in 1100 kg drums or 200-inch barrels. It is required to be stored in a cool, dry, and well-ventilated warehouse, away from direct sunlight and moisture. Proper measures should be taken to prevent freezing in low temperatures. It is recommended to store the product in plastic containers.
Shelf time:
The recommended storage time for this product under normal and suitable conditions is 12 months. This product is a high-concentration macro-molecular product. During its storage, it is possible for suspended or colloidal particles to appear, which a natural phenomenon is. Mixing the product with water can resolve this issue without affecting its regular use. After the expiration date, the product can still be used following laboratory approval.