Deco Flow 650-G3
Liquid epoxy grout without solvent with high resistance to withstand active loads and industrial use
Description
This product is produced on the basis of granular epoxy resin and inorganic silica along with polyamine hardener and it is offered in three types of high epoxy grout – self-leveling epoxy grout and resistant epoxy grout, which the presence of mineral filler causes a significant increase In the compressive strength of this product .
Application
Construction
Bridge and road construction
Dams
Repairing bridges and roads, filling the stand of heavy machinery, planting reinforcement in concrete
Properties and benefits of binding powder
Very high compressive strength. High resistance to vibration and chemicals
No shrinkage.
High adhesion to concrete and metal.
Consumption
By calculating the cross-sectional volume and specific weight of 1.8 grams Cubic centimeters can be calculated
Other factors will be at least one hour.
It is necessary to follow the exact composition ratio.
This composition does not contain solvents. Avoid using any type of solvent to reduce the viscosity. If the viscosity of the product is not satisfactory, inform the technical department of the company so that they can provide you with a thinner product.
At each stage, mix the two components of resin and hardener, which can be used before the end of the material’s life. Considering the exothermic nature of the reaction between the two components of resin and hardener and the dependence of the curing speed of the material on the temperature, as well as the insulation of the product, it should be considered that the larger the volume of the material
The work surface must be free of any contamination such as grease, oil, dust, rust, old paint, non-stick materials and moisture. The presence of such conditions leads to a sharp decrease in adhesion.
Be mixed The consumption time will be practically shorter.
Package type :
Cleaning should be done according to the following procedures; Washing with suitable solvent, washing with water or air pressure, washing with caustic chemicals, burning with flame, surface sandblasting. Sanding, suction operation and other methods. Dayan Beton A 20 kg carton contains three components as follows: 8 Rayn components can be provided in 3 kg packaging. Component . Hardener can be presented in 1 kg packaging. C. The powder can be provided in 16 kg packaging.
And maintenance conditions:
After cleaning, apply the primer layer.
Mix the two components of resin and hardener with the suggested ratio in a concrete mixer at slow speed (maximum 50 rpm) for approximately 2 minutes. Then add the appropriate amount of silica and mix for 2 minutes. Then pour the product in a layer with a maximum height of 2 cm. For grouting with volume or A year Because these products in liquid form cause water pollution More height is necessary after the cooling of the previous layer And the soil becomes from spilling the remaining liquid materials in nature Pour the next layer with a maximum height of 2 cm. Time Waiting for the previous layer to cool down according to the ambient temperature.