BETOSIVE WM
One-component repair mortar for sealing cement base
Description:
BETOSIVE WM is a single-component, cement-based, polymer-modified, and reinforced waterproof mortar used for repairing and reinforcing concrete structures.
Applications:
Repairing various parts of reinforced concrete structures for the application of waterproofing and protective coatings.
Repairing concrete structures exposed to corrosion and moisture.
Repairing water and sewage treatment plants.
Repairing concrete fish ponds.
Repairing static cracks in hydraulic and water storage tanks.
Filling holes and cracks in concrete structures.
Filling bolt holes in concrete structures with waterproofing properties.
The advantages and features:
* No segregation
* Applicable in layer thicknesses of 10 to 50 millimeters in one layer
* Good adhesion to concrete
* Waterproof
* High compressive strength
* High resistance to sulfates, chlorides, and oils
* Easy application
* No shrinkage
* Good resistance to temperature changes
* Compatible with other materials
The surface of the work must be protected for 24 to 48 hours after application from rain, wind, frost, and traffic. This waterproof mortar can also be used for making fish ponds with dimensions of 10x10 or for filling bolt holes.
For repairing cracks, first, a V-shaped groove with dimensions of 2x2 cm should be made, and after cleaning the area from any impurities and dust, the surface should be moistened and filled with the prepared waterproof mortar under pressure.
The amount of consumption:
For each square meter at a thickness of 10 millimeters, 19.2 to 20 kilograms of powder is required. The recommended thickness for coverage ranges from a minimum of 10 to a maximum of 50 millimeters.
The packaging, duration, and storage conditions:
- 25 kg bags.
- 12 months in the original and primary packaging.
- Store in a dry environment at temperatures between 5 to 35 degrees Celsius. Protect against excessive heat and freezing.
Equipment Cleaning:
Equipment and tools used should be washed immediately after use with water. If the mortar dries on the equipment, cleaning will only be possible through mechanical methods.
Warnings and Limitations:
- The work surface should be protected for 24 to 48 hours after repair from rain, frost, traffic, and impact.
- It may be harmful upon contact with the skin.
- Avoid application in rainy and freezing conditions.
- The pH of the substrate should be at least 5.5.
- Do not use processing materials.
- The prepared mixture should be used within 30 minutes at a temperature of 20 degrees Celsius.
Please take care to avoid applying the mortar at temperatures below 5 degrees Celsius and above 35 degrees Celsius.
- Cleaning and washing should be done after the completion of the curing period (four weeks).
Healthy and Safety:
Avoid contact with eyes and skin, and wash your hands after use. In case of contact with eyes, skin, or ingestion, seek medical attention immediately or refer to the safety data sheet.
Close the container lid when not in use and keep it out of reach of children.
Storage:
The storage period in the original packaging under suitable conditions is 12 months. For further information, contact the Technical and Specialized Concrete Clinic in Iran if needed.