DEZOSIVE A-100
High Strength, non-flow , epoxy bedding and Repair mortar
The properties of Dezosive A-100 are as follows:
- Precise formula and consistent results
- Only requires the addition of water at the point of use
- No shrinkage
- Excellent adhesion
- Good flexibility
- Smooth surface, easy workability
- Relative thermal and sound insulation
- Color variety
- Reduces future costs for surfaces that need to be painted
Packaging:
Dezosive A-100 is available in 15 or 20-kilogram packaging.
Specifications:
- Specific gravity: 1785 kg/m3 (after mixing)
- Non-flammable
- Compressive strength after 7 days: 60 MPa (according to ASTM D695)
- Bond strength greater than concrete base
- Working time: 1.45 hours at 25°C and 45 minutes at 40°C
- Surface hardening: 7 hours at 25°C and 2 hours at 40°C
- Full hardening: 5 days at 25°C and 3 days at 40°C.
Performance:
1. First, clean the surface to be repaired thoroughly and remove all particles and soft layers.
2. Mix the second part (catalyst) with the first part (main resin) using a hand mixer until the color is uniform.
3. Apply the mixed material to the surface using a trowel.
Note: Using a trowel with a sharp edge will make the application of the material easier.
Coverage:
3 kg of Dezosive A-100 covers 1.1 m² with a thickness of 1.5 mm. It is mixed in a ratio of 3:1 and is ready to use.
Chemical Resistance:
Dezosive A-100 exhibits resistance against a wide range of various chemicals such as liquids, domestic and industrial sewage, seawater, dilute acids, strong and weak bases, sulfur gases, minerals, plant and animal oils, ammonia, and formaldehyde.
Care for Tools:
At the end of each work stage, tools must be cleaned immediately with a cleaning solvent.
Storage:
Tools should be stored away from direct sunlight and excessive pressure.
Quality Assurance:
All products provided by the Technical and Specialized Beton Clinic of Iran comply with international quality standards.