BETOSIVE P-1100
Color coating and protection of concrete surfaces, especially for exposed concrete and interior and exterior view, based on the 1504 E standard
Description:
1100-P BETOSIVE is a modified cement base coating with filler and special polymers, suitable for creating uniform concrete surfaces, painting exposed concrete facades, and solving the problems of color differences in old and new concrete surfaces, repaired concrete surfaces, or creating concrete facades Expose is in interior and exterior designs.
Also, this coating is to protect concrete surfaces for exposed concrete surfaces against rain and carbonation.
Indications:
Implementation of protective coating on exposed concrete surfaces
Creating a uniform color in concrete facades in buildings,
Parking lots, industrial structures, cooling towers, bridges,
Concrete tanks and
Creating concrete facades in restaurants, houses and stores
Advantages and features:
Being economical and durable
Can be done with a brush, roller or trowel
The possibility of vapors escaping from the concrete to the outside of the cover
Long execution time with low limit
Easy to apply (cold) and seamless
High similarity to concrete
Integrated, without seams and cold joints and creating a bridge on concrete
Turkish cream
It has relative self-cleaning properties
Technical Specifications:
|
Component : Polymer
modified admixture and
special cement
Gray
25 kg BETOSIVE P-1100: 3.5-
4.8 L
water1,60 g/cm3
≥1,20 N/mm2 (28 days)
2 bars positive
<0,10 g (after 4 hours) (TS EN
12808-5)
|
Content
Color
Mixing
Mixture Density
Adhesion Strength
Resistance to
Pressurized Water
Capillary Water
Absorption
|
|
2 hours
3-5 minutes
+5°C to +25°C
-20°C to +80°C
Brush
2 days
7 days
3 days
14 days
3824.90.70.00.00
|
Usage Period
Maturity Period
Application Temperature
Service Temperature
Application Tools
Drying Time
Mechanical Strength
Water Impermeability
topcoated by plaster/ceramic
Final Strength
HS Code
|
Method of Use:
Surface preparation:
The surface must be free from all weak materials, dust, mold oil, paint, mud, etc. In general, the surface must be cleaned of any materials that prevent adhesion. Cracked and damaged concrete must be removed before applying the repaired coating, as well as weak concrete and mortar.
The work surface must be smooth and without porosity. Pores and static cracks should be repaired and filled using mortar containing Eltex adhesive or cement base repairer Dezosive1010.
The execution surface should be saturated with a dry surface by moistening.
Procedure:
Pour the powder into a clean bucket or container and slowly add water to it and mix at the same time by stirring at 400 to 600 per minute.
For application using a brush, 8 kg of water should be used for each bag of the product, and for application using a mallet, an average of 4 liters of water should be used for each bag. Continue mixing for 3 to 5 minutes until the mixture is uniform and homogeneous precipitation is obtained. Apply 1100-P BETOSIVE prepared after mixing with a brush or trowel in one or two (depending on the required thickness) on the surface. You can use the prepared mixture for two hours. On external surfaces, cover Applications must be protected from direct sunlight, rain and frost for 24 hours.
Dosage:
1 to 2 kg of mixture is required per square meter depending on the porosity and quality of the surface.
Packaging and storage conditions:
25 kg bag
Store in a dry environment at a temperature of 5 to 35 degrees Celsius. Protect from high heat and frost
Equipment cleaning:
Used equipment and supplies should be washed with water immediately after use. If the mortar dries on the cleaning equipment, it will be possible only by mechanical methods.
Warnings and limitations:
Avoid contact with skin and eyes.
It should be prohibited to perform during frost and rain.
Protect from direct sunlight, frost, rain, traffic and extreme humidity after application until drying.
Avoid applying the coating in air and surface temperatures below 5 degrees Celsius and above 25 degrees Celsius.
When the surface is not damaged by traffic, you can apply tiles or mortar.
Safety tips:
Avoid contact with eyes and skin and wash your hands after use. In case of contact with eyes, skin or swallowing, consult a doctor immediately or refer to the safety section of the data sheet. Close the lid of the container when not in use and keep it out of the reach of children.
Maintenance:
The storage period is 12 months in the original packaging and in proper conditions. If you need more information, contact Iran concrete technical and specialized clinic.