Dezobond F
Effervescent anti-acidic and alkaline malt
This mortar consists of two components, liquid and powder, which is used for the installation and bonding of anti-acid tiles in acidic and alkaline environments. Its liquid part is based on furan resin and its powder part contains hardener and different mineral powders. Its foaming resin and hardener part are supplied from German sources and its powder part is supplied from various mineral materials inside the country. In addition to its mechanical strength, this malt is resistant to common acid and alkaline materials in the industry up to c 160.
|
Special Weight
pushing resistance
Tensile strength
Heat transfer coefficient
Coefficient of thermal expansion
modulus of elasticity
Adhesion resistance to ceramics
Minimum and maximum ambient temperature during execution
Maximum heat tolerance during the service phase
Duration of use of mortar after mixing
Initial drying time
Complete drying time for chemical loading
Mixing ratio by weight of two components
Mortar consumption per square meter of substrate layer tiling
|
1/9 g /cm2
50 n / mm2
7 n / mm2
2/1 w/m.k
2/4 *102
10000- 11000 N/ mm2
1/5 N/mm2
5-35 degrees Celsius
160 degrees Celsius
45 minutes
4 hours
7 days
4.5 parts of powder- 1 liquid part
9.5n/mm2, including 5 mm thickness of the substrate layer
|
|
Chemical agent
Nitric acid 5%
Petroleum
Phenol 5%
Phenol 90%
Phosphoric acid 30 %
Phosphoric acid 60%
Phosphoric acid 86%
Potassium hydroxide 5%
Potassium hydroxide 10%
Potassium hydroxide 50% Sweater
SODIUM CHLORIDE
SOLUTION
SODIUM HYDROXIDE 5%
SODIUM HYDROXIDE 10%
SODIUM HYDROXIDE 50%
SODIUM HYPOCHLORITE 2%
SODIUM HYPOCHLORITE 2%
SODIUM HYPOCHLORITE 12.5%
Sulfur dioxide
Sulfur acid 30%
Sulfur acid 50%
Sulfur acid60%
Sulfur acid 60%
Sulfur acid 70%
Sulfur acid 98%
Turpentine oil
Toluene
Trichloroethylene
xylene
Acetic acid 10%
Acetic acid 50%
Acetic acid 96%
Acetone 10%
Acetone 100%
Ammonia solution 10%
Ammonia solution 25%
Aniline 1%
Aniline 100%
Benzene
Calcium hydroxide
Carbon disulphide
Carbn tetrachloride
Destilled water
Ethanol 96%
Ethylacetate
Fatty acids > c6
Glycol
Hydrochloric acid 25%
Hydrochloric acid 36%
Hydrochloric acid 10%
Hydrochloric acid 40%
Hydrochloric acid 70%
Hydrogen peroxide 5%
Hydrogen sulfide
Methanol
Methylacetate
Methylenechloride
Methylethylketone
|
Max. temperature ©
40
100
120
80
140
120
80
100
40
20
140
140
100
40
20
20
60
-
140
140
100
40
80
60
-
120
100
80
100
140
100
80
70
60
100
40
100
60
80
100
60
80
140
80
60
100
140
140
120
60
40
20
40
140
60
60
40
60
|
Resistance
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
(+)
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
|
* Resistant
* Limited or conditional resistance
* Not resistant
Packing:
011 kg set includes 27 kg of powder and 27 kg of resin.
Inventory:
The product should be covered and stored at a temperature of +7 to +57 degrees Celsius, away from sunlight and in a dry environment. In these conditions, the useful life of these materials is 9 months.
Precautions and safety:
When working with Dezobond F, use personal protective equipment such as gloves and clothing - mask and special glasses.
In case of possible contact with the eyes, wash it immediately for 7 minutes and see a doctor, and in case of contact with the skin, wash it carefully.
Quality assurance:
All the products that are produced and supplied under the name of Iran Concrete Technical and Specialized Clinic are produced according to domestic and international standards and in their original packaging under any condition, they have the guarantee of this unit. If you need more technical information, contact the experts of this unit.