DEZOGARD A-320
Epoxy zinc phosphate primer
This product has anti-corrosion properties and creates a very hard layer on metal surfaces. This coating dries due to chemical reaction and is used as a protective coating in metal structures and industrial tanks due to the presence of zinc phosphate anti-corrosion pigment. It prevents the corrosion of metal surfaces in unfavorable weather conditions and wet spots.
Technical Information:
Gray shade
Mixing ratio A/B = 100/13
Epoxy thinner
Density 1.38 ± 0.1 gr/
Solid weighing 72 ± 2 percent
Volume solid 53 ± 3 percent
cover 7/5
Surface drying time less than 6 hours, deep 24 hours, final 7 days
Thickness 70 microns
Method of Use:
Due to the importance of the mixing ratio of the components and its effect on the quality of the product, we mix the two components A and B together for 5 minutes with a suitable stirrer until it becomes uniform. After waiting for an hour, it is ready to use.
Surface conditions:
In order to achieve adhesion, the desired surface must be completely clean, dry and free of moisture, dust, grease, rust and other external factors to increase the adhesion of the coating and prevent peeling. The traces of rust are cleaned (sandblast 2.5 sa or other methods) and painted immediately.
Storage time:
One year under standard conditions.
Safety tips:
It is recommended to avoid continuous inhalation of this paint in closed spaces and to use appropriate safety equipment as much as possible and to wash with plenty of water in case of contact with skin and eyes.
Technical approval:
All the products offered by Iran Technical and Specialized Concrete Clinic are in accordance with international quality standards.