DEZOGARD A-310
Epoxy lining
This two-component product has moisture resistance that forms a hard layer on metal surfaces after drying. It is dried due to chemical reaction and is used as a protective coating in metal structures and industrial tanks to prevent the corrosion of metal surfaces in unfavorable weather conditions and wet places.
Technical Information:
Shades of various colors
Mixing ratio = 13/100A/B
Epoxy thinner
Density 1.4 ± 0.1 gr/
Solid weighing 71 ± 2 percent
volume solid 51 ± 2 percent
cover lit /²m 7
Surface drying time less than 6 hours, deep less than 24 hours, final 7 days
Dry film thickness 70
Method of Use:
Considering the importance of the mixing ratio of the components and its effect on the quality of the product, mix the two components A and B together and mix for 5 minutes with a suitable mixer until it becomes uniform. After an hour of waiting, it is ready to use.
Surface conditions: In order to achieve greater adhesion, the desired surface must be completely clean, dry and free of moisture, dust, grease, salt and other external factors to create 100% adhesion. 1 2 Sa and be painted immediately.
Storage time:
One year under standard conditions.
Safety tips:
It is recommended to avoid continuous inhalation of this paint in closed spaces and use appropriate safety equipment as much as possible and wash with plenty of water in case of contact with skin and eyes.
Technical approval:
All the products offered by Iran Technical and Specialized Concrete Clinic are in accordance with international quality standards.