DEZOFLOOR 810
Anti-acid epoxy phenolic coating
This coating is formulated on the basis of epoxy resin and anti-acid hardener, which has very good adhesion on concrete, metal, stone, etc. surfaces. And mineral acids) most solvents, diesel, gasoline, water, oils and industrial waste water and salts are used. Due to its high compressive and abrasion resistance, it is used in various industries, including military, petrochemical, chemical, pharmaceutical and industrial industries.
Technical Information:
Cream shade (available in dark shades)
Mixing ratio A/B = 20/100
Density gr/〖cm〗^31 ± 0.4 1.4
100 percent solid weight
Volume solid 100%
Covering 1 square meter per liter with a thickness of 1 mm
Surface drying time 8 hours, deep 24 hours, final 7 days
Salt spray more than 700 hours
Application method:
Considering the importance of the mixing ratio of the components and its effect on the quality of the product, we mix the two components A and B together and stir for 5 minutes with a suitable mixer until it becomes uniform. Pour the prepared coating on the desired surface and spread it evenly on the surface with a spatula. We remove the following bubbles caused by stirring using a bubble catcher tool. This procedure is performed twice with an interval of 20 minutes.
Performance tools and equipment:
Hand mixer with suitable power, spatula, comb spatula, bubble roller, shoes with studded soles, scraper.
Storage time:
One year under standard conditions.
Technical services:
The technical department of Rayehe Beton Sabz Company (technical and specialized concrete clinic of Iran) is ready to cooperate and provide services for the correct use of its materials.