Concrete Metal Fibers
Concrete alloy steel fibers
Description:
Steel alloy fibers with low carbon and cold rolled steel wire with the best quality are produced by Kirill Korea Steel Industries from the best and highest quality wire materials that are in the top range.
General description of alloy fibers:
According to the standard: ASTM510M
• Tensile strength: 700~1200 MPa
• Strong bonding force in concrete by stitching
• Appearance: Sticky fibers in strips
• Packaging: uniform arrangement packaging with no fiber traces
• Semi-forged curved heads act as a support inside the concrete and have a tremendous effect on control and stability and resistance against looseness.
Advantages of alloy fibers:
• Reduction of manpower when mixing these materials in concrete
• Saving working hours; it is possible to mix steel fiber quickly, which can be done continuously and quickly without delaying the construction of concrete tunnel pipelines and shotcrete.
• Simple equipment; If alloy fibers are used, there is no need for a fiber spreader at the time of use.
Quality of alloy fibers:
• Unparalleled playability
• Unlike granular particles designed by volume, 100% can be used to strengthen concrete.
• By using these fibers, a hard concrete can be achieved.
Features of alloy fibers:
• Increasing resistance to slackness, tensile strength with high flexibility, resistance to breaking force, compressive strength.
• Increased resistance to cracks after drying.
• Very high resistance to explosion (correction of cracks)
• Creation of post tension force after the explosion
• Increased shelf life and durability
• Increased stability over time
• Improving resistance and preventing weakness during earthquakes
• Increased shelf life and durability
• Crack prevention (crack control) by plastic shrinkage of cracks
• High resistance to erosion and corrosion.
• Increase in concrete properties, which leads to a decrease in concrete thickness in shear tension.
• Intensification of concrete cohesion by distribution of alloy fibers.
• Improving costs, manufacturability and safety without the need for mesh and mesh plates.
• Effective three-dimensional reinforcement in concrete.
• Effective prevention in the structure of organs by stopping corrosion with negative ions.
Indications:
Steel fibers can be used in the construction of tunnels, dams, power plants, concrete asphalt roads, decks of bridges and dams, railway traverses, commercial and industrial floors, airport runways, decks, covers, slope stabilization, and Other special programs use mesh instead.
Packaging:
Concrete metal fibers are supplied in 20 kg bags.
Storage:
Store in a dry environment away from direct sunlight.
Shelf life:
It can be used for up to 24 months in a cool covered environment, away from moisture and in the original packaging.
Safety:
Metal fiber concrete is a less harmful material. It does not harm the skin under normal conditions. However, as a chemical compound, protective gloves and glasses should be used to avoid contact with the skin and eyes, or wash with water after direct contact with the skin or eyes.
Technical services:
The technical department of Rayehe Beton Sabz Company (technical and specialized concrete clinic of Iran) is ready to cooperate and provide services for the correct use of its materials.