BETOPAINT PW
BETOPAINT PW is formulated on the basis of water-resistant and quick-drying resins, and its adhesion is high on concrete, brick and cement surfaces, and it has good resistance to impact and abrasion. This paint is generally recommended for painting swimming pools and fresh water ponds. Resistance to water environments, suitable drying time, excellent covering power, resistance to wear, impact, sunlight and ultraviolet light are the features of this product.
Technical specifications at ֯25 temperature:
• Theoretical coverage: 9-10 square meters per liter, the actual amount depends on the surface under work, thickness of the coating, means of application and environmental conditions.
• Surface drying time: maximum 1 hour
• Time to apply the next layer: at least 24 hours - drying time
It depends on air flow, ambient temperature, humidity, thickness and number of layers.
•Gloss: -
•Flash point: -
How to use:
Surface preparation:
First, fill the pool with water and after two weeks, drain the water to remove all the alkaline concrete from its surface, then clean the surface with a wire brush. Coloring should be done after complete drying in sunny weather.
Application method:
Dilute BETOPAINT PW pool paint with the appropriate amount of pool thinner or thinner and apply one coat of pool paint, so that all the pores and small pores of the surface are covered. Apply the next layer after 24 hours. For painting, it is preferable to use a brush so that the paint penetrates into the pores of the concrete and creates more adhesion. The amount of mixing of thinner with paint depends on the temperature of the environment, the work surface and also the painting tool. But in normal painting conditions, the mixing ratio of thinner to paint coating is 40%-45% with a brush and 45%-50% with a spray. According to the weather conditions, fill the pool with water after 72 hours to one week after the paint dries.
Washing equipment:
After finishing the work, wash and dry hands, painting tools or spilled materials on the ground with white spirit solvent. Follow the manufacturer's safety instructions when using white spirit solvent.
Safety tips and storage conditions:
Store the contents of the container in a dry, cool environment away from direct sunlight and with proper ventilation. Close the container tightly after use. The best time of consumption is up to 48 months after the date of production if proper storage conditions are observed. When applying paint, use proper ventilation and mask and leave doors and windows open if possible. Wash hands after use. In case of swallowing or eye contact (after washing with plenty of water), refer to medical centers.